Make your own McDonalds French Fries

My first post for a while in this blog, and we'll be looking at creating authentic McDonalds French Fries.  The recipe calls for Crisco Shortening, but if you can't get this then Cookeen should be good enough.

Special Tools
Deep fryer
French Fry Cutter
(or patience for cutting potatoes)

Ingredients:
2 large Idaho russett potatoes
1/4 cup sugar
2 Tablespoons corn syrup
1½-2 cups hot water
6 cups Crisco® shortening
1/4 cup beef lard (or save the fat from previously cooked burgers)
salt

Preparing your french fries
Peel the potatoes. In a large mixing bowl, combine sugar, corn syrup, and hot water. Make sure the sugar is
dissolved.

Using a french fry slicer, cut the peeled potatoes into shoestrings. The potatoes should be 1/4" x 1/4" in thickness, and about 4" to 6" long. (You can do this with a knife, but it is alot of work)

Place the shoestringed potatoes into the bowl of sugar-water, and refrigerate. Let them soak about 30
minutes.

While they're soaking, pack the shortening into the deep fryer. Crank up the temperature to "full". The
shortening has to pre-heat for a very long time. It will eventually liquify. After it has liquified and is at least 375°, drain the potatoes and dump them into the fryer. (be careful, it will be ferocious)

After 1 to 1½ minutes, remove the potatoes and place them on a paper towel lined plate. Let them cool 8 to
10 minutes in the refrigerator.

While they're cooling, add the lard or beef drippings to the hot Crisco®. Again, crank the temperature to
full. Stir in the lard as it melts into the oil. It will blend in.

After the deep fryer is reheated to 375°-400°, add the potatoes and deep fry again. This time for 5-7 minutes until golden brown. Remove and place in a large bowl.

Sprinkle generously with salt, then "toss" the fries to mix the salt evenly. ( I suggest about 1 teaspoon of
salt, maybe slightly more) Serve hot, serve immediately, and enjoy! Depending upon the size of the potatoes, this recipe make about 2 portions medium sized fries.

Special Notes
Note¹***** If you want more fries, double the recipe---but DON'T double the cooking oil. Just cook them
in shifts, adding about 1/4 cup more Crisco® and 1
tablespoon lard for the second batch.

Note²***** If cooking for a minute or so, removing, and returning the fries to the oil seems like a pain in
the ass, that's because it is. But it is an important
"blanching" step required for that great taste.

Note³***** For an easier clone of McDonald's french fries, you can use the frozen, pre-cut Ore-Ida®
shoestring potatoes. Just cook them in the same combo of
Crisco® and lard, skipping the "blanching" process. Cook them while still frozen for 6-10 minutes
(depending upon the amount) until golden brown. They're good,
but not nearly as accurate in taste and texture as the fresh recipe.